Capabilities
The Capabilities of the Network
The Capabilities of the Network
64,000 sq. ft. of total Shop Space 125,000 sq. ft. of total Laydown Area
Certifications
CWB shop CWB certified welders Interprovincial "Red" Seal Pressure vessel license Steam license Underwriters Laboratory (UL)
The network firms and subcontractors are required to comply with established policies and procedures which have been developed to meet or exceed the requirements of Occupational Health and Safety.
Members have excellent safety records because safety is built into everything they do.
Members have excellent safety records because safety is built into everything they do.
Health and Safety
Industries Served
Mining Pulp & Paper Marine & Fishing Forest Products / Saw Milling Telecommunications Oil & Gas Commercial Structural Food & Beverage General Construction
Machining
Equipment
Press brakes
A total of five (5) up to 120 Tons, 10’ x ½”
Hydraulic Shears
A total of four (4) up to 10’ x 3/8”
Bending
A total of three (3) up to 120 Tons, 10’ x ½”
Lathes
A total of sixteen (16) up to 22” swing, 8’ center to center
Milling Machines
A total of seven (7) up to 8” diameter and a length of up to 25’
Plasma Cutting Tables (Air)
A total of three (3) up to 12’ x 6’ x 1 ¼” stainless
Welding
Mig, Tig, Wire feeders, and plasma cutters
Drill Press
A total of five (5) up to 3” bit
Iron Worker
A total of five (5) up to 70 Tons
Punching: up to 1 1/16” x 1” diameter
Bending: 3’ x 3’ x ¾”
Cutting: 3/8” x 14”; ½” x 12”
Angle notcher: 3’ x 3’ x 3/8 angle
Plate Roller
Up to 8’ x ½”
Angle Roller
Up to 2’ x 2’ x ¼” angle
50 HP Hydraulic Test Bench
Lock formers
Up to 18 GA
Cranes
A total of two (2) 3 Ton OH
A total of three (3) 5 Ton OH
A total of two (2) 25 Ton Boom Trucks
A total of one (1) 50 Ton P & H All-terrain
A total of five (5) up to 120 Tons, 10’ x ½”Hydraulic Shears
A total of four (4) up to 10’ x 3/8”Bending
A total of three (3) up to 120 Tons, 10’ x ½”Lathes
A total of sixteen (16) up to 22” swing, 8’ center to centerMilling Machines
A total of seven (7) up to 8” diameter and a length of up to 25’Plasma Cutting Tables (Air)
A total of three (3) up to 12’ x 6’ x 1 ¼” stainlessWelding
Mig, Tig, Wire feeders, and plasma cuttersDrill Press
A total of five (5) up to 3” bitIron Worker
A total of five (5) up to 70 TonsPunching: up to 1 1/16” x 1” diameter
Bending: 3’ x 3’ x ¾”
Cutting: 3/8” x 14”; ½” x 12”
Angle notcher: 3’ x 3’ x 3/8 angle
Plate Roller
Up to 8’ x ½”Angle Roller
Up to 2’ x 2’ x ¼” angle 50 HP Hydraulic Test BenchLock formers
Up to 18 GACranes
A total of two (2) 3 Ton OH A total of three (3) 5 Ton OH A total of two (2) 25 Ton Boom Trucks A total of one (1) 50 Ton P & H All-terrain
Fabrication
Sheet Metal
Firms in the network have a combined experience totaling 70 years as firms (plus management and employees have hundreds of years of experience as individuals).
Employees
The total number of employees is 80.
Operations
Services are available 24 hours a day seven days a week.
The network is located in western Newfoundland. All member firms are located within a one hour radius.
Location
Combined Experience
Website created by Darren Doucette